Table of Contents
Advertisement
20 Troubleshooting
Symptom
Displayed images are
distorted.
Black bars are displayed on
both edges of the screen.
The connected camera
cannot be controlled.
128
Operating Instructions
Cause/solution
•
Images may be distorted when non-interlace signals,
VCR (VTR) signals or signals not compliant with the
standard in your locality are transmitted.
•
When the picture (camera) mode is D1, due to the
standard of video signal, black bars appear instead of
images on both edges of the screen. Black bar(s) also
appear(s) even in the VGA mode when signals not
compliant with the standard in your locality are
transmitted.
•
Confirm that "On" is selected for "RS485
transmission" on the [RS485] tab.
•
Confirm that each of the settings on the [RS485] tab
match the settings of the connected camera.
•
If Pan/Tilt/Zoom functions cannot be operated for
Panasonic cameras, you must select "Custom" for
"Protocol" on the [RS485] tab of the "Image" page and
upload the command table to the unit. For further
information, refer to our website
(http://panasonic.net/pss/security/support/info.html).
Reference
pages
-
-
41
Advertisement
Table of Contents
