Table of Contents
Advertisement
10 Configure the alarm settings [Alarm]
10 Configure the alarm settings [Alarm]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the
VMD area settings, and the alarm occurrence notification can be configured on this page.
The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
10.1 Configure the settings relating to the alarm
action [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 21, page 23)
The settings relating to the alarm can be configured in this section. Refer to page 47 for further information
about the settings relating to the alarm images.
Alarm
[VMD alarm]
When clicking "VMD >>", the [VMD area] tab of the "Alarm" page will be displayed.
[Command alarm]
Select "On" or "Off" to determine whether or not to receive the command alarm.
The command alarm is the function that provides notification of a Panasonic protocol alarm from the other
cameras. When "On" is selected, alarm actions will be performed between multiple cameras.
•
Default: Off
[Originating port number]
Select a port number to be used to receive the command alarm.
•
Available range: 1-65535
•
Default: 8181
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 52000, 59000-61000
[Video loss alarm]
Select "On" or "Off" to determine whether or not to activate the alarm when a video loss occurs.
•
Default: Off
46
Operating Instructions
Advertisement
Table of Contents
