Table of Contents
Advertisement
8 Configure the settings relating to images [Image]
H.264(1)/H.264(2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default: On
Note
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", displaying of H.264 images
or JPEG images on the "Live" page will become available.
•
When "On" is selected for "H.264 transmission" in "H.264(1)" and "H.264(2)", H.264 images are
viewable using other devices with each setting.
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)", the transmission interval
of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On: H.264 images will be transmitted using the HTTP port. Refer to page 69 for further information about
the HTTP port number settings.
•
Off: H.264 images will be transmitted using the UDP port.
•
Default: Off
Note
•
When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type".
•
When "On" is selected, it may take time to start displaying H.264 images.
•
When "On" is selected, H.264 images may not be displayed depending on the number of the concurrent
access user, etc.
•
When "On" is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
Picture (Camera) mode VGA [4:3]
Picture (Camera) mode VGA [16:9]
Picture (Camera) mode D1
•
Default: VGA
[Transmission priority]
Select a transmission priority for H.264 images from the following.
•
Constant bit rate: H.264 images will be transmitted with the bit rate selected for "Max bit rate (per
client) *".
•
Frame rate: H.264 images will be transmitted with the frame rate selected for "Frame rate*".
•
Best effort: In accordance with the network bandwidth, H.264 images will be transmitted with the bit rate
varying between the maximum and minimum bit rates that are set for "Max bit rate (per client)*".
•
Default: Frame rate
Note
•
When "Frame rate" is selected for "Transmission priority", number of users who can access the unit
may be limited more (may become less than 10).
36
Operating Instructions
QVGA/VGA
320x180/640x360
D1
Advertisement
Table of Contents
