Omron E5GN User Manual page 32

CHAPTER 3 BASIC OPERATION
Setup procedure
Power ON
Initial setting level
Set input specifications
Set control
specifications
Set alarm type
Adjustment level
AT execution
(when PID con-
trol is selected)
Operation level
Set alarm values
Start operation
3–4
Operation level
Initial setting level
Press
keys to select
input type.
Press
keys to select
PID control.
Press
keys to set ST
to OFF.
Check the
control
period.
Check alarm
type.
Operation level
Press
After AT execution
keys to set set
point to
During AT execu- "150_C".
tion
Adjustment level
Execute AT
(auto-tun-
ing).
After AT execution
Operation level
During AT execution
Make sure that
set point is
"150_C".
Make sure that
control is run-
ning.
Press
keys to set alarm
value to "30_C".
Power ON
Process value/set
point
Press key for at least three seconds.
Control stops.
Input type
In ON/OFF
control
In PID con-
trol
To execute ST
To cancel ST
Control period (heat)
(unit: seconds)
Alarm 1 type
Press key for at least one second.
Process val-
ue/set point
Press key for less than 1 second.
To execute
AT
To cancel AT
Press key for less than 1 second.
Process val-
ue/set point
During run
During stop
Alarm value 1
Start program execution