Omron E5GN User Manual page 93

CHAPTER 5 PARAMETERS
Advanced Function Setting Level
Parameter initialize
This parameter returns parameter settings to their defaults.
Function
Setting
Multi-SP uses
When the multi SP" parameter is set to ON", you can select set points 0 to 3 by oper
ating the keys on the front panel of the controller.
Function
• Default : OFF.
Setting
F Related parameter
Multi SP" (operation level)
See
5–26
: Initializes all parameters.
: Turns the E5GN OFF after returning parameter settings to their defaults.
: You can select set points 0 to 3.
: You cannot select set points 0 to 3.