Arm / Disarm Beeps - Watchguard N517Series II User Manual

32

4.8. Arm / Disarm Beeps

Arming and disarming beeps can be programmed in one of the following
configurations.
Default
BOTH ON
HOW TO CHANGE ARMING / DISARMING BEEPS
1.
Safety Lock must
be off
2.
Press both buttons
for 3 seconds
3.
Press 1 time
4.
Press 1 time
Within 30 seconds
5.
Press to enable
arming beeps only
The system will automatically exit programming mode.
Option 1
Arming Beep Only
Ensure Safety Lock has been turned off within the last 5
minutes. See Section 4.2.
Enter Programming mode by pressing buttons 1 & 2
together for 3 seconds. The siren will beep 3 times to
confirm you have entered programming mode.
Within 3 seconds, press Button 2 to select special
features. You will hear 2 beeps as confirmation.
Within 30 seconds, press Button 1 & 2 together to enter
Beep Selection. You will hear 3 beeps as confirmation.
Within 30 seconds
Press to enable
disarming beeps
only
OR
Option 2
Disarming Beeps Only
Within 30 seconds
Press to enable both
arming and disarming
beeps
OR