The Screamer - Watchguard N517Series II User Manual

2.3. The Screamer

Inside Roof
Figure 4
Mounting the Screamer
1. Drill a hole (15mm diameter) into
the ceiling where you want to
mount the screamer. Pick a position
where there is no stud/framework
above the ceiling, preferably in a
corridor or hallway.
2. Feed the wire coming from the
screamer up through the 15mm hole
into the ceiling where it will join
the wire from the main unit.
3. Push the screamer on to the ceiling
aligning the hole with the wire
coming out of the screamer.
4. Place the self-tapping screws into
Ceiling the mounting holes on the screamer
then screw them into the ceiling.
5. Connect the (red) female RCA plug
into the (red) male RCA plug.
9