Safety Lock - Watchguard N517Series II User Manual

24

4.2. Safety Lock

Safety lock is a feature, which prevents accidental changes to the programming of the
system. Safety Lock must be turned off to allow programming.
You will only be able to enter programming mode within 5 minutes of following the
procedure, HOW TO TURN OFF SAFETY LOCK.
HOW TO TURN OFF SAFETY LOCK
1.
Press 1 time
2.
Press 2 times
(within 3 secs.)
3.
Press 7 times
(within 8 secs.)
4.
Siren beeps
5 times
(low tones)
5.
NOTE: If you cannot enter programming mode, this is because safety lock is on. If
you cannot turn off safety lock, this would mean safety lock is already off.
Ensure the alarm is disarmed by pressing Button 2 once.
Arm the system in STAY mode. Do this by pressing
Button 1, twice. On the first press you will hear a beep. On
the second press you will hear a low tone beep.
Within 3 seconds of STAY arming, press Button 1, another
7 times within 8 seconds.
For confirmation that safety lock is off, you will hear 5
beeps from the main unit after you have completed the
steps above.
If you don't hear these beeps, then try this procedure again
from step 1.
SAFETY LOCK IS NOW OFF for 5 minutes. You can
now enter programming mode within this time.