Resources Controlled By; Pci Slot; Cpu Clock Ratio; Spread Spectrum - Albatron PX865PE PRO II User Manual

Resources Controlled By

BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto (ESCD) (default)、Manual
IR Q Resourc s e
When resources are controlled manually
the type of device using the interrupt. T
set to "Manual".
Options: IRQ-3/ 4/ 5/ 7/ 9/ 10/ 11/ 12/ 14/ 15
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and VGA compatibility.
O ptions: Disabled (default)、Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the "32" it will optimize
PCI speeds. Options: 0-255、32 (default)

PCI SLOT1- 5

This item allows you to select an IRQ address for PCI slot 1-5.
Options: Auto (default)、3、4、5、7、9、10、11、
Frequency/Voltage Co

CPU Clock Ratio

This field will only display if the CPU has not been set to a locked state by the CPU manufacturer. If
your CPU is locked, you will not be able to adjust the "CPU Clock

Spread Spectrum

The Spread Spectrum function can reduc
Options: Disabled、Enabled (default)
CPU Host Frequency (MHz)
T his item displays the CPU Host frequency . You can set it from XXX to 255. The default depends
on your CPU frequency and the CPU installed.
, you can assign each system interrupt a type, depending on
his is only configurable when "Resources Controlled By" is
assigned to
12、14、15
ntrol
Ratio". Options: 8X - 50X
EMI (Electromagnetic Interference) generated.
e the
32
PX865PE PRO II
PCI device