Table of Contents
Advertisement
Video RAM Cacheable
Select "Enabled" to allow caching of the video RAM which may improve performance. If any other
program writes to
this memory area, a system error may result. Options: Enabled、Disabled (default)
PnP/PCI Configurations
PNP OS Installed
When set to "YES", BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
SCSI). The rest of the cards will be initialized by the PnP operating system like Windows
se
t to "NO", BIOS will initialize all the PnP cards. For non-PnP operating syst
this option must be set to "NO".
Options: No (default)、Yes
Reset Configur
ation Data
Select "Enabled" to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that t
boot. Options: Disabled (default)、Ena
Resources Controlled
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manual
B
IOS automatically assigns them. Options: Auto <ESCD> (default)、Manual
IRQ Resources
When resources are controlled manuall
th
e type of device using the interrupt. This is only configurable when "Resources Controlled By" is
set to "Manual".
IRQ-3
IR
Q-4
IRQ-5
IRQ-7
IR
Q-9
IRQ-10
IRQ-11
IR
Q-12
IRQ-14
IRQ-15
bled
By
ly assign IRQ DMA and memory base address fields, since
y, you can assign each system interrupt a type, depending on
assigned to: PCI device
assigned to: PCI device
assigne
d to: PCI device
assigned to: PCI device
assigned to: PCI device
assigned
to: PCI device
assigned to: PCI device
assigned to: PCI device
assigned to:
PCI device
assigned to: PCI device
32
KM400A Series
®
95. When
ems (DOS, Netware),
he OS cannot
Advertisement
Table of Contents
