Aleratec LightScribe Duplicator SA 260201 User Manual page 75

Troubleshooting
Error Code Error Message
213 DVD-RAM is not
supported!
230 Not enough HDD
space
231 Redundant Name
232 Format Failed!
233 Partition Corrupted
240 Wrong Password!
241 Login Failed
251 Copy Audio Error
252 Not Audio CD
253 Over Blank Disc
Capacity
260 No update file
261 Wrong update file
262 Unknown flash model This is a system error during the System Firmware
263 User Abort
Recommendation
The system does NOT support DVD-RAM format.
There is not enough hard drive space to create a
new partition. Please delete some existing
nonimportant partition to free up more spaces.
The Partition Name you've entered has already
been used. Please choose a different partition name.
Unable to format the built in hard drive. It is likely
the hard drive is bad. Contact Tech Support for
Replacement.
The partition data is corrupted. Normally either the
Hard Drive is bad or the hard drive had being used
by another system. Please re-format the hard drive.
Incorrect Password has been entered. Please confirm
the password and try again.
After 3 attempts of entering an incorrect password
the unit will lock. Please confirm the password and
restart the system to try again.
An error occurred during the recording process of
a particular track. Mostly due to bad blank media.
Please try with different blank.
The Master Disc is not an Audio CD. Only Audio
CD's will be able to Edit Audio Tracks.
The Audio Tracks you've selected is more than the
blank media can hold. Please remove some tracks
in order to proceed.
The system couldn't find the Update file to
perform the System Firmware Update. Contact
Tech Support for assistance.
The update file you are trying to update is not
compatible for your system.
Update. Please contact Tech Support for assistance.
The system has acknowledged the Abort command.
www.aleratec.com 69