Stand-Alone Duplicator Sa: Tutorials; Making Disc-To-Disc Copies - Aleratec LightScribe Duplicator SA 260201 User Manual

1:3 blu-ray/dvd/cd
Table of Contents

Advertisement

Stand-Alone Duplicator SA: Tutorials

Making Disc-to-Disc Copies

This process copies a Master Disc to several blank discs simultaneously. Due to
the nature of simultaneous disc duplication, a good quality Master Disc and lower
recording speeds maybe necessary to ensure high success and quality duplications
rates.
1.
Turn on the duplicator. After the duplicator has booted up, you will see the
following display:
2.
Make sure the Source Drive is set to the BD/DVD/CD source drive.
It is very important to make sure that your current Source Drive is the BD/DVD/
CD source drive in order to avoid unnecessary error messages. To check the
Source Drive, do the following:
Use UP or DOWN arrow buttons to navigate to the following screen, or
a.
press the "SOURCE" Fast Key:
Press ENT to enter Select Source menu and you will see the following:
b.
Make sure it is located at "Drive 1 Port 0.0". If not, press the UP or
DOWN navigation button to search for it. There will be drive model
information where XXXXXX is shown above.
c.
Press ENT to submit your selection.
3.
Go back to the "COPY" menu.
a.
Use UP or DOWN arrow button to navigate to the following screen:
Aleratec
1. COPY
COPY
USB
PRINT
Aleratec
9. Select Source
COPY
USB
PRINT
Drive 1 Port 0.0
XXXXXX
COPY
USB
PRINT
Aleratec
1. COPY
COPY
USB
PRINT
www.aleratec.com
1.00
ESC
SOURCE
1.00
ESC
SOURCE
ESC
SOURCE
1.00
ESC
SOURCE
ENT
ENT
ENT
ENT
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LightScribe Duplicator SA 260201 and is the answer not in the manual?

Table of Contents