Aleratec LightScribe Duplicator SA 260201 User Manual page 41

Stand-Alone Duplicator SA: Tutorials
Note: If the number of blank discs you inserted doesn't match the
number of discs detected on the screen, please give 10-15 seconds
for the duplicator to recognize all of your blank discs.
e. After 2 or 3 seconds of processing time, the following Copy Progress
Screen will appear.
Counter Specified
Copying...
0/21 12%
COPY USB PRINT
"4012MB" indicates the capacity of the Master
Disc.
"481MB" indicates the current MB from the
Master Disc that has been copied.
"12%" indicates the current progress of the
duplication.
"0/21" indicates you have a project size of 21
copies and you have made 0 copies so far.
"H" indicates you are copying from a Hard
Drive Image.
Note: It is normal to see the progress indicator stay at 0-10% and at
100% for approximately 30 seconds during CD duplication. Additionally
it is normal to see the progress indicator stay at 0-10% and at 100% for
up to 1 minute during DVD duplication. There is a delay caused by the
initializing and finalizing stage of disc duplication. Due to this delay, it is
normal to see progress indicators stay at 100% for up to several minutes
before moving on. Once the disc duplication is completed, successful
copies will be ejected and you will see the following display:
H4012MB
481MB
ESC ENT

SOURCE
PASS 3 FAIL 0
Waiting for Blanks
COPY USB
"PASS 3" indicates that you've just made 3
successful copies.
"FAIL 0" indicates that you have no failure in
this run.
"3" indicates that you've successfully copied 3
copies so far.
www.aleratec.com
Copying...
0
COPY USB
"4012MB" indicates the capacity of the Master
Disc.
"481MB" indicates the current MB from the
Master Disc that has been copied.
"12%" indicates the current progress of the
duplication.
"0" indicates that you have made 0 copies so
far.
"H" indicates you are copying from a Hard
Drive Image.
( 3)
ESC ENT

PRINT SOURCE
No Counter
H4012MB
12% 481MB
PRINT SOURCE
ESC ENT

35