Aleratec LightScribe Duplicator SA 260201 User Manual page 73

Troubleshooting
7. Cannot boot-up or fails to upgrade firmware.
▪ Contact our Tech Support.
8. Can I load data directly from my computer to my duplicator's Hard Drive?
▪ No, your duplicator's Hard Drive has a unique file system that computers
will not recognize. Thus, you can't perform any read/write operations to the
Hard Drive from your computer.
9. How do I reset my duplicator back to default?
Use UP or DOWN arrow button to navigate to the following screen.
a.
Press ENT to enter Utility Menu. You will see the following display:
b.
Use UP or DOWN arrow button to navigate to the following screen.
c.
Press ENT to enter Load Default Menu. You will see the following display:
d.
Press ENT to confirm and you system will be loaded back to default. Once
e.
the operation is complete, you will see the following display:
f. You need to perform "Shutdown" and restart the system in order for this to
take effect.
Aleratec
15. Utilities
COPY USB PRINT
Utilities
1. Disc Info
COPY USB PRINT
Utilities
5. Load Default
COPY USB PRINT
Load Default
Press OK to continue
COPY USB PRINT
Utilities
5. Load Default
COPY USB PRINT
www.aleratec.com
1.00
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ENT
ENT
ENT
ENT
ENT
67