Aleratec LightScribe Duplicator SA 260201 User Manual page 46

Stand-Alone Duplicator SA: Tutorials
Select the Source drive - continued
b. Enter "Source Selection" menu.
Press ENT to enter into "Source Selection" menu.
You will see the following display:
Make sure it is located at "Drive 1 Port 0.0". If not, press the UP or
DOWN navigation button to search for it. There will be drive model
information where XXXXXX is shown above.
c. Select desired master reading device.
Press the UP or DOWN button to select the desired master reading source.
Then press ENT to submit your Source Selection.
d. Once your selection has been changed successfully, you will see the
following screen for 2 seconds:
Then you will be directed back to the main menu:
40
Drive 1 Port 0.0
XXXXXX
COPY USB PRINT
Drive 1 Port 0.0
Selected!
COPY USB PRINT
DUPLICATOR
9. Select Source
COPY USB PRINT
www.aleratec.com
ESC

SOURCE
ESC

SOURCE
1.00
ESC

SOURCE
ENT
ENT
ENT