Aleratec LightScribe Duplicator SA 260201 User Manual page 35

Stand-Alone Duplicator SA: Tutorials
Rename Existing Hard Drive Partition Name - continued
7. Rename the partition you've just selected.
To enter a partition name, use the UP or DOWN button to select the character
and use ESC or ENT button to move the cursor position. When you are
finished, move the cursor to OK and press ENT. For example, if I want to
rename the image from "FUN" to "FUN2", do the following:
a. Move the cursor to the forth position by pressing ENT until you reached
desired location:
b. Press DOWN button consecutively until "2" is displayed.
With the Image Name changed from "FUN" to "FUN2", press ENT
c.
consecutively until the cursor is moved to OK.
d. Press ENT once to submit your name selection. When you are done you
will see the following display:
You will be directed back to "Hard Drive Setup" menu.
Enter HDD Image Name
[FUNx ] OK
COPY USB PRINT
Partition FUN2
Renamed!
COPY USB PRINT
Hard Drive Setup
3. Rename Partition
COPY USB PRINT
www.aleratec.com
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ENT
ENT
ENT
29