Aleratec LightScribe Duplicator SA 260201 User Manual page 26

Stand-Alone Duplicator SA: Tutorials
Note: If either one of the PREVIOUS 2 screens are displayed for
more than 2 minutes, please check your Master Disc or blank discs
for quality.
d. Allow 5-10 seconds for the duplicator to detect both your Master Disc and
blank discs. After your Master Disc and blank discs have been recognized,
you will see the following display:
Note: "X" indicates the number of discs recognized by the Writer
Tray. For this example, number of discs could be up to 3.
Note: By default, the "Auto Start" setting is set to "Auto". For
example, if your duplicator has detected 3 blank discs and didn't
detect any additional blank discs within 30 seconds, the duplication
will start automatically.
When the number of blank discs inserted matches the number of discs
detected press ENT to confirm. You will see the following display:
Note: Give the duplicator 10-15 seconds to recognize all the blank
discs. If the number of blank discs you inserted doesn't match the
number of discs detected...
20
Preparing...
X Disc Detected, Go?
COPY USB PRINT
Processing...
Please Wait
COPY USB PRINT
www.aleratec.com
ESC

SOURCE
ESC

SOURCE
ENT
ENT