Error Codes - Aleratec LightScribe Duplicator SA 260201 User Manual

Troubleshooting

Error Codes

Typically the system will show an error message and error code if a problem occurs.
Please reference the below diagram for a description of the error codes and the
recommend solution:
Error Code Error Message
200 Master Disc Empty
201 Bad Master
202 To targets!
203 Burner Mixed or
Firmware Version
Mixed
204 Targets & Master
Not Compatible!
205 Targets Not Blank!
206 Targets & Master
Size Mismatch!
207 Targets M Code
Mixed!
208 Targets are not RW
discs!
209 Master Disc is CSS
Protected!
210 Bad Discs!
211 This format can not
be tested!
212 DVD is not
supported!
68
Recommendation
Blank Disc is in the Source Tray. Make sure the
source is properly selected and double check the
Master Disc.
The Master Disc is not recognized by the Source
Tray. Please eject and reload the Master Disc or
double check the Master Disc for quality.
There is no blank disc(s) recognized by the system.
Please make sure the blanks disc(s) is properly
placed in the recording tray(s).
The writers carry different model/version. They
are required to be identical for proper duplication.
Contact our Tech Support for detail.
The Master Disc is a different format than the
blank disc(s). The format between the Master Disc
and blank must be the same.
The blank media you've inserted are not blank.
Check your blank media's quality.
The size of your Master Disc and the copied disc
doesn't match. This error usually occurs during the
Compare process. Double check the master and the
copied disc.
The blank discs you've placed are not identical.
Please make sure they have the same brand and
speed to ensure proper duplication.
The media you are trying to erase are not RW
media. ONLY RW media is able to be erased.
Your Master Disc is Copy Protected. You can not
copy this type of disc.
The Blank media you are using are not being
recognized by the Writers.
The blank media you've inserted does not support
TEST function You need to use either CD-R or
DVD-R/RW media to perform TEST function.
The system does NOT support DVD format.
www.aleratec.com