Change The Setup Settings - Aleratec LightScribe Duplicator SA 260201 User Manual

Stand-Alone Duplicator SA: Tutorials

Change the SETUP Settings

Most of the internal settings and information are stored inside the "Setup" menu. To
explore and modify these settings is simple. In the following example you will be
modifying the "Auto Start" setting.
Note: The default "Setup" is set for optimal performance. It is unnecessary to
change this setting if you are satisfied with your duplicator performance.
1. Use the UP or DOWN arrow button to navigate to the following screen.
2. Press ENT to enter "Setup" menu. You will see the following display:
Use the UP or DOWN arrow button to navigate to the following screen.
3.
Press ENT to enter "Auto Start Setting" menu. You will see the following display:
4.
5. Use the UP or DOWN arrow button to modify the setting to "Full". Press ENT to
submit your selection. You will see the following display:
6. To modify more settings, go back to step 3. Otherwise, press ESC button to go
back to main menu.
Aleratec
14. Setup
COPY USB PRINT
Setup
1. Language
COPY USB PRINT
Setup
2. Auto Start
COPY USB PRINT
Auto Start
Auto
COPY USB PRINT
Setup
2. Auto Start
COPY USB PRINT
Aleratec
14. Setup
COPY USB PRINT
www.aleratec.com
1.00
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
1.00
ESC

SOURCE
ENT
ENT
ENT
ENT
ENT
ENT
41