Aleratec LightScribe Duplicator SA 260201 User Manual page 40

Stand-Alone Duplicator SA: Tutorials
How to Make Copies from the Hard Drive - continued
vii. Press DOWN button consecutively until "1" is displayed.
viii. Now, we have "0021" displayed and then, press ENT once and the
cursor is now moved to OK.
ix. Then, press ENT once to submit your counter value.
Now you will see following screen:
Note: If the ABOVE screen is displayed for more than 2 minutes,
please check your Blank Discs for quality.
d. Please allow 5-10 seconds for the duplicator to detect your Hard Drive
partition and Blank Discs as well. After your Hard Drive partition and
Blank Discs have been recognized, then you will see the following screen:
Note: By default, the "Auto Start" setting is set to "Auto". For
example, if your duplicator has detected 3 blank discs and
didn't detect any additional blank discs for 30 seconds, then the
duplication will be started automatically.
Note: Once the number of blank discs you inserted matches the
number of discs detected on the screen. Then press ENT (if you
are not using Auto Start or wish to speed up the process) to confirm
and the following Processing screen will appear.
34
Preparing...
Waiting for Blanks
COPY USB PRINT
Preparing...
3 Disc Detected, Go?
COPY USB PRINT
The "3" indicates there are 3 discs that were recognized
by the recording tray. Actual quantity may be different
depending on your machine.
Processing...
Please Wait
COPY USB PRINT
www.aleratec.com
ESC

SOURCE
ESC

SOURCE
ESC

SOURCE
ENT
ENT
ENT