Typematic Rate (Chars/Sec); Typematic Delay (Msec); Security Option - AXIOMTEK SBC8440 User Manual

!"

Typematic Rate (Chars/Sec)

When the typematic rate is enabled, the system registers repeated
keystrokes speeds. You can select speed range from 6 to 30
characters per second. By default, this item is set to 6.

Typematic Delay (Msec)

!"
When the typematic rate is enabled, this item allows you to set the
time interval for displaying the first and second characters. By default,
this item is set to 250msec.
!"

Security Option

This field allows you to limit access to the System and Setup. The
default value is Setup. When you select System, the system prompts
for the User Password every time you boot up. When you select Setup,
the system always boots up and prompts for the Supervisor Password
only when the Setup utility is called up.
The system will not boot and access to Setup will be denied if
System
the correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the
Setup
correct password is not entered at the prompt.
NOTE:

To disable security, select PASSWORD SETTING at
Main Menu and then you'll be asked to enter
password. Don't type anything and just press
<Enter> to disable security. Once security is
disabled, the system will boot and you can enter
Setup freely.
Award BIOS Utility
SBC8440 3.5
Form Factor SBC User's Manual
6 characters per second
6
8 characters per second
8
10 characters per second
10
12 characters per second
12
15 characters per second
15
20 characters per second
20
24 characters per second
24
30 characters per second
30
250 msec
250
500 msec
500
750 msec
750
1000 msec
1000
)>