Using The Wall-Mounting Bracket - 3Com 3CRWEASYA73 User Manual

4 Attach the bridge with bracket to the plate already fixed to the pole.
Attach the bridge
to the plate on
the pole
5 Use the included nuts to secure the wireless bridge to the pole bracket. Note
that the wireless bridge tilt angle may need to be adjusted during the
antenna alignment process.
Be sure to take account of the antenna polarization direction; all antennas in
a link must be mounted with the same polarization.
U W
SING THE
Perform the following steps to mount the unit to a wall using the wall-mounting
bracket:
CAUTION: The wall-mounting bracket does not allow the wireless bridge's
!
intrgrated antenna to be aligned. It is intended for use with the unit using an
external antenna.
-M B
ALL OUNTING
3-4
RACKET