3Com 3CRWEASYA73 User Manual page 152

C 6: C L
HAPTER OMMAND INE
Related Commands
sntp-server daylight-saving
This command sets the start and end dates for daylight savings time. Use the no
form to disable daylight savings time.
Syntax
Default Setting
Command Mode
Command Usage
Example
This sets daylight savings time to be used from July 1st to September 1st.
Outdoor 11a Building to Building (config)#sntp-server daylight-saving
Enter Daylight saving from which month<1-12>: 6
and which day<1-31>: 1
Enter Daylight saving end to which month<1-12>: 9
and which day<1-31>: 1
Outdoor 11a Building to Building (config)#
sntp-server timezone
This command sets the time zone for the access point's internal clock.
Syntax
Default Setting
I
NTERFACE
sntp-server enable (6-38)
[no] sntp-server daylight-saving
Disabled
Global Configuration
The command sets the system clock back one hour during the specified
period.
sntp-server timezone <hours>
hours - Number of hours before/after UTC.
(Range: -12 to +12 hours)
-5 (BOGOTA, EASTERN, INDIANA)
6-40