Placing The Access Point; Placing On A Flat Surface; Mounting On A Wall - 3Com 6000 User Manual

6 C 2: I
HAPTER NSTALLING THE
Placing the Access
Point

Placing on a Flat Surface

Mounting on a Wall

1
3
A P
CCESS OINT
The access point can be placed on a flat surface such as a table, desktop, or the
top of a cabinet; or it can be mounted on a wall or to the T-rail grid of an
acoustical ceiling.
Find a surface that is clear of obstructions and provides good reception. Set the
access point down on its four rubber feet and adjust the antenna so that it stands
straight up.
To mount an access point on a wall, follow the instructions on the mounting
template supplied in the box and refer to the following illustration. It is usually a
good idea to mount the access point near the ceiling above any obstructions that
could block transmission. Position the antenna so that it stands straight up.
2
4