Mac Address Authentication - 3Com 3CRWEASYA73 User Manual

C 6: C L
HAPTER OMMAND INE
Command Mode
Example
Outdoor 11a Building to Building #show authentication
Authentication Information
===========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 0 min
802.1x supplicant
802.1x supplicant user
802.1x supplicant password
Address Filtering
System Default : ALLOW addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
Outdoor 11a Building to Building (config)#

MAC Address Authentication

Use these commands to define MAC authentication on the access point. For local
MAC authentication, first define the default filtering policy using the address filter
default command. Then enter the MAC addresses to be filtered, indicating if they
are allowed or denied. For RADIUS MAC authentication, the MAC addresses and
filtering policy must be configured on the RADIUS server.
Table 20 MAC Address Authentication
Command
address filter default
address filter entry
address filter delete
mac- authentication server Sets address filtering to be performed with local or
I
NTERFACE
Exec
Function
Sets filtering to allow or deny listed addresses
Enters a MAC address in the filter table
Removes a MAC address from the filter table
remote options
: DISABLED
: DISABLED
: EMPTY
: EMPTY
: ALLOWED
Status
----------
DENIED
ALLOWED
6-78
Mode Page
GC 6-79
GC 6-79
GC 6-81
GC 6-81