3Com 3CRWEASYA73 User Manual page 172

C 6: C L
HAPTER OMMAND INE
show snmp
This command displays the SNMP configuration settings.
Command Mode
Example
Outdoor 11a Building to Building #show snmp
SNMP Information
==============================================
Service State
Community (ro)
Community (rw)
Location
Contact
EngineId
EngineBoots:1
Trap Destinations:
=============================================
Outdoor 11a Building to Building #
I
NTERFACE
Exec
:80:00:07:e5:80:00:00:2e:62:00:00:00:18
1: 192.254.2.9, Community: *****, State: Enabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
dot11InterfaceAGFail
dot11StationAssociation
Enabled
dot11StationReAssociation
Enabled
dot1xAuthFail Enabled
dot1xAuthSuccess Enabled
dot1xMacAddrAuthSuccess
Enabled
iappStationRoamedFrom
Enabled
localMacAddrAuthFail
pppLogonFail Enabled
configFileVersionChanged
Enabled
systemDown Enabled
: Enable
: *****
: *****
: WC-19
: Paul
Enabled dot11InterfaceBFail
Enabled dot11StationAuthentication
Enabled dot11StationRequestFail
dot1xAuthNotInitiated
dot1xMacAddrAuthFail
Enabled iappContextDataSent
Enabled iappStationRoamedTo
Enabled localMacAddrAuthSuccess
sntpServerFail
Enabled radiusServerChanged
systemUp
6-60
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled