C
6: C
L
HAPTER
OMMAND
INE
Example
Outdoor 11a Building to Building (if-wireless g: VAP[0])#description
Outdoor 11a Building to Building (if-wireless g: VAP[0])#
ssid
This command configures the service set identifier (SSID).
Syntax
Default Setting
Command Mode
Command Usage
Example
Outdoor 11a Building to Building (if-wireless g: VAP[0])#ssid RD-AP#3
Outdoor 11a Building to Building (if-wireless g)#
closed-system
This command prohibits access to clients without a pre-configured SSID. Use the
no form to disable this feature.
Syntax
Default Setting
I
NTERFACE
RD-AP#3
ssid <string>
string - The name of a basic service set supported by the access point.
(Range: 1 - 32 characters)
802.11a Radio: VAP_TEST_11A (0 to 3)
802.11g Radio: VAP_TEST_11G (0 to 3)
Interface Configuration (Wireless-VAP)
Clients that want to connect to the wireless network via an access point
must set their SSIDs to the same as that of the access point.
[no] closed-system
Disabled
6-126