3Com 3CRWEASYA73 User Manual page 146

C 6: C L
HAPTER OMMAND INE
Default Setting
Command Mode
Example
Outdoor 11a Building to Building (config)#logging host 1 10.1.0.3
Outdoor 11a Building to Building (config)#
logging console
This command initiates logging of error messages to the console. Use the no
form to disable logging to the console.
Syntax
Default Setting
Command Mode
Example
Outdoor 11a Building to Building (config)#logging console
Outdoor 11a Building to Building (config)#
logging level
This command sets the minimum severity level for event logging.
Syntax
Default Setting
Command Mode
I
NTERFACE
None
Global Configuration
[no] logging console
Disabled
Global Configuration
logging level <Emergency | Alert | Critical | Error | Warning | Notice |
Informational | Debug>
Informational
Global Configuration
6-34