Wall Mounting The Wireless 7760 - 3Com 3CRWE776075 Owner's Manual

Wall Mounting the
Wireless 7760
Building materials can impede the wireless signal - a solid metal
door or aluminum studs may have a negative effect on range.
Try to position wireless devices and computers with wireless
adapters so that the signal passes through drywall or open
doorways and not other materials.
For convenient positioning the device comes with a cradle that can
be wall mounted. For additional security, the Access point also
comes with a locking bar, which can be used with a security lock
(not provided) to lock the Access point to the cradle after the
Access point is mounted to a wall.
To wall-mount the Access Point:
1 Route Ethernet cable through the large opening in the cradle.
2 Screw the cradle to a wall.
The figures below show a cable being routed through the large
opening in the cradle and then the cradle being mounted to a
wall.
3 Connect Ethernet cable to the port on the front of the access
point.
4 Snap the access point onto the mounting bracket.

Wall Mounting the Wireless 7760

9