3Com 3CRWEASYA73 User Manual page 231

Example
Outdoor 11a Building to Building(if-wireless g)#preamble short
Outdoor 11a Building to Building(if-wireless g)#
antenna control
This command selects the use of two diversity antennas or a single antenna for
the radio interface.
Syntax
antenna control <diversity | left | right>
• diversity - The radio uses both antennas in a diversity system. Select this
method when the Antenna ID is set to "Default Antenna" to use the
access point's integrated antennas. The access point does not support
external diversity antennas.
• right - To activate the 5 GHz external antenna, one must select the "right
" antenna in the antenna selection UI.
• left - To activate the 2.4 GHz external antenna, one must select the "left
" antenna in the antenna selection UI.
Default Setting
Diversity
Command Mode
Interface Configuration (Wireless)
Command Usage
The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
Example
Outdoor 11a Building to Building(if-wireless g)#antenna control right
Outdoor 11a Building to Building(if-wireless g)#
6-119
Using the Command Line Interface