Using The Wall-Mounting Bracket - 3Com 3CRWEASYA73 - 11a 54 Mbps Wireless LAN Outdoor Quick Start Manual

4
Attach the bridge with bracket to the plate already fixed to the pole.
5
Use the included nuts to secure the wireless bridge to the pole bracket. Note that the
wireless bridge tilt angle may need to be adjusted during the antenna alignment process.
Be sure to take account of the antenna polarization direction; all antennas in a link must be
mounted with the same polarization.

Using the Wall-Mounting Bracket

Perform the following steps to mount the unit to a wall using the wall-mounting bracket:
CAUTION: The wall-mounting bracket does not allow the bridge's integrated antenna
to be aligned. It is intended for deployment using a 5.0 GHz external antenna.
1
Always attach the bracket to a wall with the flat side flush against the wall (see following
figure).
6