3Com 3CRWEASYA73 User Manual page 188

C 6: C L
HAPTER OMMAND INE
Default
Command Mode
Example
Outdoor 11a Building to Building (config)#802.1x session-timeout 300
Outdoor 11a Building to Building (config)#
802.1x-supplicant enable
This command enables the access point to operate as an 802.1X supplicant for
authentication. Use the no form to disable 802.1X authentication of the access
point.
Syntax
Default
Command Mode
Command Usage
Example
Outdoor 11a Building to Building(config)#802.1x-supplicant enable
Outdoor 11a Building to Building(config)#
802.1x-supplicant user
This command sets the user name and password used for authentication of the
access point when operating as a 802.1X supplicant. Use the no form to clear the
supplicant user name and password.
I
NTERFACE
0 (Disabled)
Global Configuration
802.1x-supplicant enable
no 802.1x-supplicant
Disabled
Global Configuration
A user name and password must be configured first before the 802.1X
supplicant feature can be enabled.
6-76