3Com 3CRWEASYA73 User Manual page 159

Default Setting
None
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#snmp-server contact Paul
Outdoor 11a Building to Building (config)#
Related Commands
snmp-server location (6-47)
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Outdoor 11a Building to Building (config)#snmp-server location WC-19
Outdoor 11a Building to Building (config)#
Related Commands
snmp-server contact (6-46)
6-47
Using the Command Line Interface