3Com 3CRWEASYA73 User Manual page 168

C 6: C L
HAPTER OMMAND INE
Example
Outdoor 11a Building to Building(config)#snmp-server filter trapfilter
Outdoor 11a Building to Building(config)#snmp-server filter trapfilter
snmp-server filter-assignments
This command assigns SNMP v3 notification filters to targets. Use the no form to
remove an SNMP v3 filter assignment.
Syntax
Default Setting
Command Mode
Example
Outdoor 11a Building to Building(config)#snmp-server filter-assignments
Outdoor 11a Building to Building(config)#exit
Outdoor 11a Building to Building#show snmp target
Host ID
User
IP Address
UDP Port
=============================
Outdoor 11a Building to Building#show snmp filter-assignments
Outdoor 11a Building to Building(config)#
show snmp groups
This command displays the SNMP v3 pre-defined groups.
I
NTERFACE
include .1
exclude .1.3.6.1.2.1.2.2.1.1.23
snmp-server filter-assignments <target-id> <filter-id>
no snmp-server filter-assignments <target-id>
• target-id - A user-defined name that identifies a receiver of SNMP
notifications. (Maximum length: 32 characters)
• filter-id - A user-defined name that identifies an SNMP v3 notification
filter. (Maximum length: 32 characters)
None
Global Configuration
mytraps trapfilter
: mytraps
: chris
: 192.254.2.33
: 162
HostID FilterID
mytraps trapfilter
6-56