Table of Contents
Advertisement
70
Chapter 5, Configuring Your DigiSuite LE and VTR Settings
Configuring the audio output pairs
To configure your audio output pairs, click the
tab.
Audio Out
Important
Both audio output pairs must be either analog or digital.
Digital audio is available only with the optional digital module.
q
or
Analog Output
type of audio output you're using.
q
Output Pair 1
and
default audio output pairs. For example, to use the recorder connected
to your unbalanced analog OUT 1 and OUT 2 outputs, set
to
Pair 1
RCA (unbalanced analog)
To ensure that your balanced analog output is properly calibrated for
your recorder, make sure you select the option that matches your
recorder's audio input impedance. For example, if the audio input
impedance of your recorder is set to 600
(balanced analog)
load, select
XLR High Impedance (balanced analog)
Note
Refer to your VTR's documentation for instructions on how to
set its audio input impedance. If you're unsure of your VTR's setting,
select
XLR High Impedance (balanced analog)
Select the option that matches the
Digital Output
Output Pair 2
Use these lists to select your
.
. If your recorder has a high-impedance audio input
tab, then the
DigiSuite LE
Output
Ω
, select
XLR 600 Ohms
.
.
Advertisement
Table of Contents
