Table of Contents
Advertisement
54
Uninstalling DigiUtils
Changing your DigiSuite hardware
Chapter 4, Installing the DigiSuite Software
5
Follow the instructions that appear on the screen. An information box
indicates when the installation is complete.
Important
To capture material, your system must be equipped with
DigiSuite LE or other DigiSuite hardware. If you later decide to add the
DigiSuite hardware to your computer, you must remove the Matrox VFW
software codecs from your system (using
Windows NT Control Panel) before running DigiUtils Setup to install the
DigiUtils software.
½
To remove all the DigiUtils software from your system:
1
Do either one of the following:
–
Choose
UnInstall DigiUtils
folder.
–
Run DigiUtils Setup again, select
.
Next
2
The program will restart your computer for the changes to take effect.
If you want to change your card set combination, such as by adding a new
DigiSuite card, you must first uninstall DigiUtils. Once you've installed
the new card set, run DigiUtils Setup again to update your current
installation.
Add/Remove Programs
from the Matrox DigiSuite Utilities
UnInstall DigiUtils
in your
, then click
Advertisement
Table of Contents
