Timing Settings For Digisuite Le With The Digital Module - Matrox DigiSuite LE Installation Manual

Timing settings for DigiSuite LE with the digital
module
If you have the optional digital module, the following timing controls are
provided when you click the
Video Out dialog box:
q
Master Timing
key outputs from both DigiSuite LE and the digital module with
respect to your video genlock source (your analog and digital signals
are adjusted simultaneously). This lets you compensate for cable
delays within your system.
–
and
H Phase Fine-tune H Phase
the video and key outputs. Use the
if you need to fine-tune the
–
Adjusts the vertical timing of the video and key outputs.
V Phase
q
Timing Offsets
adjustments to your analog and/or digital outputs.
–
Video H Phase (SDI)
digital video output with respect to your video genlock source.
–
Key H Phase (Analog & SDI)
analog and digital key outputs and sync signals with respect to the
video output signal. You may need to do this to align your key images
with their underlying images when routing the key output to a
downstream switcher.
To check the external key alignment, set the display source in the
DigiSuite LE Video Out
select
Graphic for Key H Phase Adjustment
list.
–
SC/H Phase (Analog)
subcarrier phase with its horizontal sync pulse. This simultaneously
affects all hues in the picture.
Adjust Timing
Use these controls to advance or delay the video and
Adjusts the horizontal timing of
Fine-tune H Phase
H Phase
Use these controls to make additional timing
Adjusts the horizontal timing of only the
Adjusts the horizontal timing of the
dialog box to
Aligns your analog video output's
button in the
DigiSuite LE
control only
adjustment by subpixels.
Graphic (external key)
from the
Test Pattern
Configuring your video settings
67
, then