Table of Contents
Advertisement
Configuring your video settings
You can customize your DigiSuite LE to meet specific video input and
output requirements. For example, you can select a default video source,
adjust your incoming video signal's proc amps, and calibrate your video
and key output signals.
Configuring the video input signal
To select a default video source and configure your video input signal,
click the
DigiSuite LE
q
Use this list to select your default video source for use
Video Source
with DigiTools and third-party programs. For example, select
to use your S-Video VTR connected to Y/C IN 1 as
Y/C (S-Video) 1
your default capture source with DigiTools and Adobe Premiere. If
you have the optional digital module, select
digital input source.
q
Proc Amp Settings
amps for your incoming analog video signal. To obtain a precise
setting for a control, click its left or right arrow instead of dragging the
slider. To return a control to its factory default setting, click its
button or
SHIFT+
–
Adjusts the tint of the colors in the picture. This control won't
Hue
be available if you've selected an analog component video source.
–
Chroma
Adjusts the vividness (saturation) of the picture's colors.
tab, then the
Video In
Use these controls to adjust the default proc
click the slider.
tab.
4:4:2 (SDI)
to use your
Configuring your video settings
61
Def
Advertisement
Table of Contents
