Configuring The Audio Input Pairs - Matrox DigiSuite LE Installation Manual

Configuring the audio input pairs

To configure your audio input pairs, click the
tab.
Audio In
Important
Both audio input pairs must be either analog or digital.
Digital audio is available only with the optional digital module.
q
or
Analog Input Digital Input
of audio input you're using. If you select
controls in this dialog box will be unavailable.
q
Use this list to select your default analog audio Input
Input Pair 1
Pair 1. For example, to use the source connected to your balanced
analog IN 1 and IN 2 inputs, select
q
Input Pair 1 Gain
your analog audio Input Pair 1. To obtain a precise setting, click the
arrows instead of dragging the slider. To return to the factory default
setting, click the
q
Use this list to select your default analog audio Input
Input Pair 2
Pair 2. For example, to use the source connected to your unbalanced
analog IN 3 and IN 4 inputs, select
q
Input Pair 2 Gain
your analog audio Input Pair 2. The controls work the same as
explained for
Input Pair 1 Gain
Select the option that matches the type
XLR (balanced analog)
Use these controls to adjust the default gain of
button.
Def
RCA (unbalanced analog)
Use these controls to adjust the default gain of
.
tab, then the
DigiSuite LE
, the remaining
Digital Input
.
Configuring your audio settings
69
.