Digisuite Le Cables; Analog Video Cable - Matrox DigiSuite LE Installation Manual

DigiSuite LE cables

sure the termination switch on DigiSuite LE is set to Hi Z (see
termination switch on DigiSuite LE" on page
Video outputs
The DigiConnect/Video breakout box for use with DigiSuite LE supports
any of the following combinations of video output connections:
q
1 S-Video and 1 composite connection (Preview).
q
1 S-Video and 1 composite connection (Program).
q
1 analog component connection (Program).
Preview output
The preview output signal is always present at both video preview output
jacks.
Program output
The PROGRAM OUT switch allows you to choose analog component or
S-Video and composite for your output connections.

Analog video cable

The DigiSuite LE analog video cable, shown below, supports any of the
following combinations of video connections:
q
2 Y/C (S-Video) connections.
q
2 composite connections.
75-ohm terminator (supplied)
REF
PREVIEW OUT
COMPOSITE S-VIDEO
PROGRAM OUT MODE
Y R-Y B-Y COMPOSITE
"Set the
14).
S-VIDEO
DigiSuite LE cables
37