Important
Do not bend the attached cable too sharply. Excessive
bending or flexing can damage the internal shielded wires.
DigiConnect/Audio
Choosing your connection signal options
As you can see by reading the front panel labels, DigiConnect/Audio offers
several signal options.
Note
The front switches on DigiConnect/Audio are all recessed to prevent
unwanted changes. Use a small screwdriver or other appropriate object to
change the settings as required.
Analog audio input
You can choose between the XLR and RCA input connections by simply
sliding the appropriate BAL/UNBAL switch towards the jack you wish to
use. In addition, each 600 OHM switch provides termination on the XLR
jack located directly above it.
DigiSuite LE
Digital module
Video
connector
Audio
connector
ON
BAL
600
OHM
OFF
UNBAL
DigiSuite LE DigiConnect/Audio breakout box
29
Video
connector
Audio
connector