Table of Contents
Advertisement
68
Configuring your audio settings
Chapter 5, Configuring Your DigiSuite LE and VTR Settings
Because of the method used to perform the SC/H Phase adjustment,
not all values between –180 and 180 degrees are supported. If needed,
the value you enter will be clipped to the nearest supported value.
You can select the default DigiSuite LE audio input and output pairs you
want to use with DigiTools and third-party programs. You can also adjust
the gain of your analog audio input pairs. If you have the optional digital
module, you can select a genlock source for your audio.
Note
DigiTools uses only audio Input and Output Pair 1.
Selecting your audio genlock source (digital module
only)
To select the source to which you want to genlock your audio, click the
tab, then the
DigiSuite LE
You can select one of the following audio genlock options:
q
Select this option to genlock your audio to the same source
Video
you're using to genlock video as defined in the
This option is suitable for most studio setups.
q
Digital Input Pair 1
options to genlock your audio to your first or second digital audio
input pair, respectively. You'll need to do this when working with a
digital audio player that doesn't support a video genlock source.
tab.
Audio Genlock
or
Digital Input Pair 2
dialog box.
General
Select one of these
Advertisement
Table of Contents
