Speco O2P30 Owner's Manual page 38

Motion detection
Preview
You can preview the motion detection window on the preview
window.
General
> Sensitivity: Enter the sensitivity to detect an object in
motion.
• Save: Click this button to confirm the settings.
Note:
The Motion Detection function may not work depending on your
installation environment.
38
How to set the motion detect window
1. Click the [Add] button. The motion detect window is
displayed. You can add five windows maximum for the
motion detection area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the
window size for motion detection.
4. Click the [Save] button to save the settings.
Note:
• You can reset the window size. Click one of the window edge
or corner and drag & drop to reset the motion detection
area.
• Motion Detection can be activated when at least one of
channels(HD/SD) is enabled, Video codec is set to H.264 and
GOP size is more than 2.
Operation and settings