Speco O2P30 Owner's Manual page 33

802.1x
Specifies whether 802.1x network access is enabled.
802.1x/EAPOL using EAP-TLS
> Enable: Select on to enable the protocol.
Certificates
> To upload or remove the certificates
1. Click the [Browse] Button.
2. Find and open the certificates file.
- CA Certificate: Upload the accredited certificate included
public key.
- Client Certificate: Upload the accredited certificate
included client authentication key.
- Client private key: Upload the accredited certificate
included client private key.
3. Click the [Upload] button to install certificates.
4. Click the [Remove] button to delete certificates.
Basic Configuration
Operation and settings
> EAPOL Version: Select the EAPOL version.
> EAP ID: Enter the ID of the client certificate using up to 16
characters.
> Password: Enter the password of the client private key using
up to 16 characters.
• Save: Click this button to confirm the settings.
SIP
SIP Setting
> Enable: Set to On when you use the SIP server.
> SIP Server: Enter the hostname or IP address of the SIP
register server.
> UserName: Enter the name of the device used when making
calls with SIP.
> Password: Enter the SIP server authorization password.
• Save: Click this button to confirm the settings.
33