Speco O2P30 Owner's Manual page 35

4. Select the authority from the drop down list to provide
the access rights to each user and then click the [Save]
to confirm your selection.
- Administrator: Allows you to operate setup menus
and to view live images.
- Power user: Use of the limited functions of the
system. (The Setup menu is not allowed.)
A power user can use the Live View, OSD control and
audio functions.
- Normal user: Provides the lowest level of access,
Allows to view live images only.
- Custom user: The user can login and view the live
stream image only when the "Enable anonymous
login" option is checked to enable it.
Note:
Remember the password.
> Edit the registered user
You can change the password or authority.
1. Choose the user ID and then click the [Edit] button.
2. Change the Password or Authority, then click the [Save]
button to confirm your selection.
> Delete the registered user
1. Choose the user ID you want to delete.
2. Click the [Remove] button.
Note:
The default administrator user ID 'admin' and 'anonymous'
are permanent and cannot be deleted.
Operation and settings
Anonymous
> Enable anonymous login
Check the box to enable anonymous user login - allows the
user access for only viewing the live stream image.
Maximum RTP stream connection
> Maximum number of simultaneous stream connection:
Set this number to limit the number of simultaneous stream
connections.
The connections depend on the stream configuration as
shown in the following Maximum RTP stream connection by
stream configuration.
Video Codec Resolution
H.264 1920 x 1080
MJPEG 1920 x 1080
Note:
Preview window of the IP device setting and preset setting
are affected by this setting.
• Save: Click this button to confirm the settings.
Maximum
Frame
Quality RTP
Rate
stream
30 HIGHEST Up to 10
10 HIGHEST Up to 7
35