Speco O2P30 Owner's Manual page 21

Basic Setup
Resolution
> HD: Displays the maximum image size of the camera.
> SD: Select the output image size of the camera.
Profile
> Enable: Click to activate the stream function.
> Codec: Select the video mode (Codec) from the drop-down
list. The viewer can choose among MJPEG, H.264 and H.264_
HIGH.
> Frame Rate: Set the frame rate of the image.
> GOP size: It means "Group of Pictures". The higher the GOP,
the better is the video quality of the camera. Edit the value
of GOP from 1 to 30. This setting is valid for H.264 video
format only.
> Bitrate Mode: Select the Quality.
- VBR: The bit rate may vary depending on the complexity
of the video to meet the selected quality.
- CBR: The video quality may vary in order to preserve a
constant bit rate.
Operation and settings
> Stream quality: If the [Quality] option set to VBR, this
option is displayed. Select the stream quality from the drop
down box, the camera supports five types. (Highest, High,
Medium, Low and Lowest)
> Alias: Enter the profile name you want to use.
> Video Rate: If the [Bitrate Mode] option set to CBR, this
option is displayed. Edit the bit rate value from 256 kbps to
10 240 kbps.
Note:
If the 'Bit rate' is configured too low with high resolution,
the actual frame rate will decrease because of narrow
bandwidth. So you need to set or change the 'Bit rate' to a
higher value.
• Save: Click this button to confirm the settings.
21