Speco O2P30 Owner's Manual page 17

> WDR/BLC: Use WDR/BLC option to view the object clearly
in backlight conditions. Select [WDR/BLC] option on the
[Exposure] menu.
- WDR: WDR (Wide dynamic range) feature can be
very helpful to cope with very challenging lighting
conditions. It is capable of capturing both of the dark
part and bright part and combining the differences
into a scene to generate a highly realistic image as the
original scene.
- BLC: Camera's backlight compensation feature helps
alleviate issues of visibility in high contrast areas.
- OFF: Not in use.
> Defog: Set to [On] to remove the fogginess of the image.
Note:
If you set [WDR] or [BLC] on the [WDR/BLC] menu, the
[Defog] setting is not available. When the [WDR/BLC] menu
set to [Off ], the [Defog] menu appears.
> Brightness: Adjust the brightness of images.
> Shutter Speed: Select the desired shutter speed for camera
exposure. You can change the shutter speed to higher speed
to capture fast-moving subjects, though the image becomes
darker.
> Sens-Up: If pictures are not clear due to darkness, this
SENS-UP operation would increase the sensitivity of picture.
Note:
If you set to one of the [Shtter Speed] options except AUTO
on the [Shtter Speed] menu or [AGC] to [OFF], the [SENS-UP]
setting is not available.
• Default: Click this button to restore back to original factory
settings.
Operation and settings
White Balance
> Mode: Select [Mode] option on the [White Balance] menu,
then select the following mode.
- Auto: You can set the white balance options
automatically. When the [Mode] is set to [Auto], [Color
Temp], [Red] and [Blue] options are not activated.
- Manual: You can set the white balance options manually.
- ATW (Auto-Tracing White Balance): In this mode, white
balance has better coverage than auto. Proper white
balance may not be obtained under the following
conditions:
1. When the scene contains mostly high color
temperature objects, such as a blue sky or sunset.
2. When the scene is dim.
17