Speco O2P30 Owner's Manual page 26

> To play the auto pan
1. Click the [Play] button to start the Auto Pan function.
2. Click the [Stop] button to stop the Auto Pan function.
Note:
If you click the [CLEAR] button, all of Auto pan position will be
deleted.
Pattern
You can activate the camera in a repeating pattern. The pattern
is programmed by recording your manual pan, tilt, and zoom
operations. The camera stores the movements you performed in
memory.
> To record the pattern
1. Click the [Start recording] button to start the pattern
recording.
2. Move the camera through the desired movement.
3. Click the [Stop recording] button to stop the pattern
recording.
Note:
The available total time of pattern differs depending on connected
PTZ device and operation.
> To play the pattern
1. Click the [Play] button to play the programmed pattern.
2. Click the [Stop] button to stop playing.
26
Auto tracking
Auto tracking
> Enable
- ON: Auto tracking setup menu appears. Then you can set
the values.
- OFF: Auto tracking setup menu disappears.
Preview
You can see the settings screen from the preview window.
1. Set the camera angle to the point you want with arrow buttons.
2. Adjust the zoom, focus options.
3. Set the Pan, Tilt, Zoom or Focus speed options.
4. Click the [Save] button to confirm the settings.
Operation and settings