Speco O2P30 Owner's Manual page 19

Privacy Mask
This function is aimed at the protection of personal privacy. The
selected part is not displayed on the screen.
1. Select the [Privacy Mask] option.
2. Set to [On] or [Off ] on the [Mode] menu.
3. Click the drop-down list to select a [Mask Number].
4. Set to [On] or [Off ] on the [Mask State] menu. If you
already registered the mask zone and [Mode] is set
to [On], the mask zone box appears on the live view
window and [Mask color], [Width], [Height], [Move X]
and [Move Y] menu is activated.
> Mask Color : You can make any color by adjusting R.G.B
Operation and settings
LEVEL and adjust the transparency of MASK.
> Height: Increase or decrease the vertical size of the mask.
> Width: Increase or decrease the horizontal size of the mask.
> Move Y: Moves vertical position of the mask.
> Move X: Moves horizontal position of the mask.
• Default: Click this button to restore back to original factory
settings.
Note:
• The [Privacy Mask] size is recommended to set the size default
or more.
• Adjust the size about 50 % bigger, to cover the object
completely.
• Click the [Mask Reset], before you adjust the new privacy
settings.
19