Speco O2P30 Owner's Manual page 24

automatic return to a particular mode.
- Off: Not in use.
- Last Tour: After the Auto Return Time is over, the camera
restarts the previous tour.
- Home: When the touring is stopped, returns to the
camera's basic position after the set time.
Note:
You have to set the basic position to perform this
function.
> Auto Return Time: Enter the auto return time of the PTZ
device in the edit box. If you set the value to 0, auto return
feature is deactivated.
• Save: Click this button to confirm the settings.
24
Preset
Preview
You can see the settings screen from the preview window.
1. Move the camera to the point you want by using the arrow
buttons.
2. Adjust the zoom, focus options.
3. Set the Pan, Tilt, Zoom or Focus speed options.
4. Click the [Save] button to confirm the settings.
Preset
Preset position is the function to register camera monitoring positions
(preset positions) associated with position numbers. By entering the
position numbers, you can move cameras to the preset positions.
Operation and settings